|
Try this:
mgcp.conf
[2084728800103] host = dynamic context = westcomllc callerid =
"Jeremy Jones" <103> nat = no transfer = yes callwaiting =
yes threewaycalling = yes cancallforward = yes mailbox = [EMAIL PROTECTED]line => aaln/1
----- Original Message -----
Sent: Wednesday, July 28, 2004 8:13
AM
Subject: [Asterisk-Users] MGCP &
Caller ID
Good Morning,
I'm having an issue with callerid display
when calles are placed _from_
an mgcp device (8x8 ata w/mgcp
firmware). Internally, there are several
different sip devices and
one mgcp device. Calls from any of the sip
devices to any other
device (sip or mgcp) have name/number displayed
properly by the called
party's phone. Calls from the mgcp device to any
other device display
"Asterisk" as the cid name, nothing for number.
Here's what I have in my
mgcp.conf for the device:
[2084728800103]
host = dynamic
context
= westcomllc
line => aaln/1
callerid = "Jeremy Jones"
<103>
nat = no
transfer = yes
callwaiting =
yes
threewaycalling = yes
cancallforward = yes
mailbox = [EMAIL PROTECTED]
When placing outbound
calls (out our pstn gateway), I always replace cid
name/number w/the main
number & name of the company, so that direction
it's not an issue --
just internal calls.
Anyone seen this & have ideas about
what to do with it?
Thanks,
Jeremy
Jones
_______________________________________________
Asterisk-Users
mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
