Hi
Just received my spanky new TE405P today to replace my Cisco gateway...
After much fiddling (I forgot to switch it to E1) I got it to work and everything "seems" to work perfectly on our ISDN PRI.
If I dial-in from the PSTN to a SIP phone, the call goes through and if I hangup either the SIP phone or the remote end, the call gets disconnected and destroyed
However, if I dial-in from the SIP phone to my PSTN and then hang up my PSTN phone, the call does not get disconnected. My SIP phone goes quiet but doesn't disconnect. If I a few seconds later pick up the PSTN phone again, the connection is still there. Only if I hangup the SIP phone, the call gets destroyed. It seems that Zap doesn't see the remote hangup...
Here is my Zaptel config and my Zapata config. I presume the extensions config etc are OK as my call-flow never changed and things were working fine with my AS5300.
Am I missing something ? How do I debug the Zap channels ?
Cheers, Walter Klomp
/etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 # This is the line in question... span=2,1,0,ccs,hdb3,crc4 # not used yet span=3,0,0,ccs,hdb3,crc4 # not used yet span=4,0,0,ccs,hdb3,crc4 # not used yet # Span 1 bchan=1-15 dchan=16 bchan=17-31 # Span 2 bchan=32-46 dchan=47 bchan=48-62 # Span 3 bchan=63-77 dchan=78 bchan=79-93 # Span 4 bchan=94-108 dchan=109 bchan=110-124
alaw=1-124
loadzone=uk defaultzone=uk
/etc/asterisk/zapata.conf [channels] context=default switchtype=euroisdn signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes echocancel=yes rxgain=0.0 txgain=0.0 immediate=no ; Channels inherit configuration above them ; Span 1 group=1 signalling=pri_cpe channel => 1-15 channel => 17-31
; Span 2 group=2 signalling=pri_cpe channel => 32-46 channel => 48-62
; Span 3 group=3 signalling=pri_cpe channel => 63-77 channel => 79-93
; Span 4 group=4 signalling=pri_cpe channel => 94-108 channel => 110-124
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
