> A couple things:
> In zapata.conf, the channels line should be:
> channel => 1-15,17-31
Thanks, now asterisk loads without error.
> If you are connected to the PSTN, the signalling should be pri_cpe (customer
> premise equipment). But your setting would be correct for connection to a
> channel bank I think.
I'm testing connected to Cisco AS5300.
> Hope this helps
> Scott
Gracias!
HoraPe
---
Horacio J. Pe�a
[EMAIL PROTECTED]
[EMAIL PROTECTED]
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
