----- Original Message ----- > Message: 15 > From: "Geoff Nordli" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Date: Tue, 3 Aug 2004 11:36:05 -0700 > Subject: [Asterisk-Users] Integration with Altigen > Reply-To: [EMAIL PROTECTED] > > I would like to integrate * with an existing Altigen PBX. I want to spend > as little money as possible to make it happen. My main goal is to > inexpensively connect a branch office to the phone system. Eventually I > would like to replace the Altigen system with an Asterisk server so I don't > want to spend any money on Altigen hardware. > > Currently the Altigen has analog interfaces with a couple of open ports. > > If I used a TDM40B (FXS ports) could I interface that with the Altigen > system and connect the two of them together.
your integration would be difficult via FX(x). the altigen is going to need to terminate the ringing line at a destination, ie vm AA that gives routing options for example. can't remember from my altigen days how well it does something like DISA but that maight work as well. going the other way would be fine, you would have to set up a dial code like "9" in the altigen that selected one of the ports connected to the *. once the port was opened you could dial anything in the dialplan in *. down and dirty but also cheap. good luck jason kawakami Open Telephony Labs, LLC www.optellabs.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
