> ----- Original Message ----- >> Message: 15 >> From: "Geoff Nordli" <[EMAIL PROTECTED]> >> To: <[EMAIL PROTECTED]> >> Date: Tue, 3 Aug 2004 11:36:05 -0700 >> Subject: [Asterisk-Users] Integration with Altigen >> Reply-To: [EMAIL PROTECTED] >> >> I would like to integrate * with an existing Altigen PBX. I want to >> spend as little money as possible to make it happen. My main goal >> is to inexpensively connect a branch office to the phone system. >> Eventually I would like to replace the Altigen system with an >> Asterisk > server so I > don't >> want to spend any money on Altigen hardware. >> >> Currently the Altigen has analog interfaces with a couple of open >> ports. >> >> If I used a TDM40B (FXS ports) could I interface that with the >> Altigen system and connect the two of them together. > > your integration would be difficult via FX(x). the altigen is going > to need to terminate the ringing line at a destination, ie vm AA that > gives routing options for example. can't remember from my altigen > days how well it does something like DISA but that maight work as > well. going the other way would be fine, you would have to set up a > dial code like "9" in the altigen that selected one of the ports > connected to the *. once the port was opened you could dial anything > in the dialplan in *. down and dirty but also cheap. > > good luck > > > jason kawakami > Open Telephony Labs, LLC > www.optellabs.com >
Sorry Jason, could you expand on your answer a little bit. I understand the dialplan parts, but not sure of the connection options. I don't have that much background in the PBX arena. Thanks, Geoff _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
