Shouldn't it be possible to pipe the channels for the MAX through the Asterisk box ?
The whole PRI into Asterisk and a PRI cable from a second port to the MAX. I haven't looked much at data calls from Zap to Zap, but it looked like it was possible. Kind regards, Martin List-Petersen On Tue, 2004-08-10 at 20:30, Nate Carlson wrote: > Hey all, > > I've got a PRI used for data calls right now, terminated in a MAX 4000. > We're only using around 12 channels on average and 16 max, so I'd like to > split off the remaining channels to terminate in an Asterisk box. > > Does anyone know of a device that'll take a PRI in, and spit out two PRI's > that share the channels? Also need to be able to do some sort of call > routing so that calls coming into the data number get terminated in our > Max and the rest of the calls go to Asterisk. It looks like the following > device will do it: > > http://www.isdnconnect.com/giff_pages/diagramb.htm > > ..but it's also rather expensive. (Looks like US ~$3k for one that > supports 3 PRI lines.) We do also have a dual-PRI license for our MAX, so > I'm investigating if it's possible to have it do the routing. > > I'd prefer to avoid running the data side of the PRI through Asterisk, as > I'll be in big trouble if that stops working. :) > > Thanks! > > ------------------------------------------------------------------------ > | nate carlson | [EMAIL PROTECTED] | http://www.natecarlson.com | > | depriving some poor village of its idiot since 1981 | > ------------------------------------------------------------------------ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
