On Tue, 21 Sep 2004 02:51:27 +0200, Rodolfo Grave <[EMAIL PROTECTED]> wrote:
> Thanks to you too... I need to configure this on POTS lines, so I
> suppose I will have to talk to my Telco.
For outbound calls, all you have to do is put all the channels into
one group, ie.
/etc/asterisk/zapata.conf ...
signalling=fxs_ks
group=1
channel=1-4
then dial the group, ie.
/etc/asterisk/extensions.conf ...
exten => _9X.,1,Dial(Zap/g1/${EXTEN:1},60,r)
For incoming calls, however, you will indeed need to ask your telco.
Usually, this would be a divert-when-busy service, ie. if line 1 is
busy, your telco will divert all incoming calls on line 1 to line 2,
if line 2 is busy to line 3 etc etc.
rgds
benjk
--
Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya,
Tokyo, Japan.
NB: Spam filters in place. Messages unrelated to the * mailing lists
may get trashed.
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
