I'm in the process of setting up the X100P card and I am getting continuous tone on the X100P but only if plugged into the POTS line. Here is what I have so far:
# lsmod Module Size Used by wcfxs 26912 0 zaptel 223460 1 wcfxs crc_ccitt 1920 1 zaptel rtc 10424 0 usbcore 108644 1 mxser 25948 0 via_rhine 17416 0
# cat /etc/zaptel.conf # loadzone = us defaultzone=us fxsks=1
# ztcfg -vv
Zaptel Configuration ======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
Earlier I didn't get the above error.
-- Linux Home Automation Neil Cherry [EMAIL PROTECTED] http://home.comcast.net/~ncherry/ (Text only) http://hcs.sourceforge.net/ (HCS II) http://linuxha.blogspot.com/ My HA Blog _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
