You want to use the wcfxo module with the X100P. wcfxs is for the TDM400P card.
--- Ilia Mirkin [EMAIL PROTECTED] On Wed, 2004-10-13 at 03:43, Neil Cherry wrote: > I'm in the process of setting up the X100P card and I am getting > continuous tone on the X100P but only if plugged into the POTS > line. Here is what I have so far: > > # lsmod > Module Size Used by > wcfxs 26912 0 > zaptel 223460 1 wcfxs > crc_ccitt 1920 1 zaptel > rtc 10424 0 > usbcore 108644 1 > mxser 25948 0 > via_rhine 17416 0 > > # cat /etc/zaptel.conf > # > loadzone = us > defaultzone=us > fxsks=1 > > # ztcfg -vv > > > Zaptel Configuration > ====================== > > > > > Channel map: > > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > > 1 channels configured. > > > ZT_CHANCONFIG failed on channel 1: No such device or address (6) > > Earlier I didn't get the above error. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
