Correct. Line as in "Wall Jack" not as in "Phone". You have to connect your FXO card with a RJ11 cable between your telephone wall socket and the RJ11 Port in the FXO card.
(You will connect a "Analog Phone" if you have a FXS card. If you connect between wall jack and fxs card. You can potentially damage the FXS card as your "LINE" bears Voltage for ringtone.) Seshu Kanuri -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Neil Cherry Sent: Wednesday, October 13, 2004 10:54 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Telco POTS -> FXO ? Maybe I'm just doing this wrong. Is the FXO card (X100P) used to connect to the telco pots line? -- Linux Home Automation Neil Cherry [EMAIL PROTECTED] http://home.comcast.net/~ncherry/ (Text only) http://hcs.sourceforge.net/ (HCS II) http://linuxha.blogspot.com/ My HA Blog _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------------------------------------------------- NOTICE: If received in error, please destroy and notify sender. Sender does not waive confidentiality or privilege, and use is prohibited. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
