On Wed, 13 Oct 2004, Neil Cherry wrote:
> Kanuri, Seshu (Company IT) wrote: > > Correct. Line as in "Wall Jack" not as in "Phone". You have to connect > > your FXO card with a RJ11 cable between your telephone wall socket and > > the RJ11 Port in the FXO card. > > OK good, I think I have an FXO card (the wcfxo module installs and > ztcfg -vv gives no errors with this one). The reason I'm so confused > is that without asterisk running, only wcfxo, zaptel and crc_ccitt > insmod'd, I can pick up the pots line phone (on the phone jack and > telco pots line on wall/line) and I hear tone (not the telco tone > or at least tone riding on the telco tone). When I dial a phone > (w/CID unit, not on asterisk) I get a busy tone and a ringing!. > Eventually I get the answering machine and the busy signal. > > OK, I found the problem! The card must be bad, maybe the pair > is reversed. When I power down the server (power off, ac cable > disconnected) I still get the tone! I've had enough of this I > think I'll get another card maybe the TDM400P and an FXO to start > with. ARGH! Complete flyer, but disconnect all other devices on the line. And: if this is a line with ADSL on it, make sure you have a filter. Steve _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
