I don't have any soft phones setup, the SNOM receives the calls no problems when the
SNOM tries to dial out it says "Not Found:" on the phone display, on the asterisk
console with "asterisk -vvvvvgc" when I try to dialout I only get
chan_sip.c:7561 handle_request: Unknown SIP command 'PUBLISH' from '192.168.69.250'
Which I am told is normal as asterisk doesn't support the Publish command....
I have an analog phone plugged into the TDM400P in another port and it dials out
without issue.
Thanks for the response this has been bugging the crap out of me, any help would be
appreciated.
My /etc/extensions.conf is as follows.
[pstn]
exten => s,1,Wait(2)
exten => s,2,NoOp(Comment Only: Call from ${CALLERIDNUM}) ; Just put a comment in the
CLI for info.
exten => s,3,Dial(SIP/snom-james,45,t) ;Dial James SNOM Phone for incoming calls
exten => s,4,Hangup
[internal]
exten => i,1,Playback(invalid)
exten => i,2,Hangup
exten => t,1,Hangup
exten => 099,1,Echo ;simple echo test when you dial 099 on your phone
include => outgoing
include => voip
include => sip
[outgoing]
exten => _9X.,1,Dial(Zap/g1/${EXTEN:1})
exten => _9X.,2,Congestion()
exten => _9X.,3,Hangup
[voip]
exten => _1XX,1,Dial(OH323/[EMAIL PROTECTED]/${CALLERIDNUM}) ; 1xx extension to
Salisbury
exten => _2XX,1,Dial(OH323/[EMAIL PROTECTED]/${CALLERIDNUM}) ; 2xx extension to
Marcoola
exten => 610,1,Dial(OH323/[EMAIL PROTECTED]/${CALLERIDNUM}) ; 610 to Jindalee
exten => 620,1,Dial(OH323/[EMAIL PROTECTED]/${CALLERIDNUM}) ; 620 to Batteryhill
[sip]
exten => 690,1,Dial(SIP/snom-james,30,tr)
exten => 690,2,voicemail2,u900
exten => 690,102,voicemail2,b900
exten => 691,1,Dial(SIP/bt-karen,30,tr)
exten => 691,2,voicemail2,u901
exten => 691,102,voicemail,b901
My sip.conf is as follows
[general]
port = 5060
bindaddr = 192.168.69.1
context = sip
disallow = gsm
allow = alaw
disallow = ulaw
nat=disable
srvlookup=no
localnet=192.168.69.0/255.255.255.0
subscribecontext = sip
[snom-james]
type=friend
secret=<password deleted>
host=dynamic
callerid="James" <690>
defaultip=192.168.69.250
dtmfmode=rfc2833
mailbox=900
[bt-karen]
type=friend
secret=<password deleted>
host=dynamic
callerid="Karen" <691>
defaultip=192.168.69.251
dtmfmode=rfc2833
mailbox=901
---------------------------------------
Although when I first start asterisk up I always get this 1 error that I am not sure
about.
chan_sip.c:681 retrans_pkt: Maximum retries exceeded on call [EMAIL PROTECTED] for
seqno 102 (Non-critical Request)
James
>Hello James,
>
>There is nothing special with the Snom phones. The empty dialplan string
>is normal. You only have to specify the displayname, account, password
>and registrar. I think you have a mistake in your extensions.conf. Does
>it work with another (soft)phone?
>
>Regards,
>Joris
>
>
>
>On Oct 15, 2004, at 1:51 PM, James Bean wrote:
>
>> I am having a problem with my new SNOM190 and my asterisk box.
>> �
>> Incoming calls to the SNOM work perfectly, but when i dial-out I get a
>> "Not Found: <number dialed>" on the SNOM display everytime I try,
>> nothing shows up on the console of the asterisk box so its not even
>> touching it.
>> �
>> I have the latest 3.54 firmware on it and when I looked at the Line 1
>> setup for my asterisk box I released that in the SNOM phone there is
>> nothing in my "Dial-Plan String" I take it it matches this inside the
>> phone to choose which line to use in the SNOM phone.
>> �
>> Unfortunately I am not finding much on the format of the Dial-Plan
>> String in the SNOM phones.
>> �
>> All I need is for it to send all calls regardless of format to the
>> asterisk box.
>> �
>> Anyone got any suggestions.
>> �
>> James
>>
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
