[from-sip] include => internal
Regards, Joris
----- Original Message ----- From: "Joris Trooster / Interstroom" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[EMAIL PROTECTED]>
Sent: Monday, October 18, 2004 11:29 AM
Subject: Re: [Asterisk-Users] SNOM 190 "Dial-Plan String" Settings
Hello James.
You have "context = sip" in your sip.conf, but you do not have any dialplan
for outgoing calls in that context.
Add to the [sip] context: include => outgoing
Regards, Joris
----- Original Message ----- From: "James Bean" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, October 18, 2004 11:13 AM
Subject: FW: [Asterisk-Users] SNOM 190 "Dial-Plan String" Settings
I don't have any soft phones setup, the SNOM receives the calls no problems
when the SNOM tries to dial out it says "Not Found:" on the phone display,
on the asterisk console with "asterisk -vvvvvgc" when I try to dialout I
only get
chan_sip.c:7561 handle_request: Unknown SIP command 'PUBLISH' from '192.168.69.250'
Which I am told is normal as asterisk doesn't support the Publish command....
I have an analog phone plugged into the TDM400P in another port and it dials
out without issue.
Thanks for the response this has been bugging the crap out of me, any help would be appreciated.
My /etc/extensions.conf is as follows.
[pstn]
exten => s,1,Wait(2)
exten => s,2,NoOp(Comment Only: Call from ${CALLERIDNUM}) ; Just put a
comment in the CLI for info.
exten => s,3,Dial(SIP/snom-james,45,t) ;Dial James SNOM Phone for incoming
calls exten => s,4,Hangup
[internal]
exten => i,1,Playback(invalid) exten => i,2,Hangup exten => t,1,Hangup
exten => 099,1,Echo ;simple echo test when you dial 099 on your phone
include => outgoing include => voip include => sip
[outgoing]
exten => _9X.,1,Dial(Zap/g1/${EXTEN:1}) exten => _9X.,2,Congestion() exten => _9X.,3,Hangup
[voip]
exten => _1XX,1,Dial(OH323/[EMAIL PROTECTED]/${CALLERIDNUM}) ;
1xx extension to Salisbury
exten => _2XX,1,Dial(OH323/[EMAIL PROTECTED]/${CALLERIDNUM}) ;
2xx extension to Marcoola
exten => 610,1,Dial(OH323/[EMAIL PROTECTED]/${CALLERIDNUM}) ; 610 to
Jindalee exten => 620,1,Dial(OH323/[EMAIL PROTECTED]/${CALLERIDNUM})
; 620 to Batteryhill
[sip]
exten => 690,1,Dial(SIP/snom-james,30,tr) exten => 690,2,voicemail2,u900 exten => 690,102,voicemail2,b900
exten => 691,1,Dial(SIP/bt-karen,30,tr) exten => 691,2,voicemail2,u901 exten => 691,102,voicemail,b901
My sip.conf is as follows
[general] port = 5060 bindaddr = 192.168.69.1 context = sip disallow = gsm allow = alaw disallow = ulaw nat=disable srvlookup=no localnet=192.168.69.0/255.255.255.0 subscribecontext = sip
[snom-james] type=friend secret=<password deleted> host=dynamic callerid="James" <690> defaultip=192.168.69.250 dtmfmode=rfc2833 mailbox=900
[bt-karen] type=friend secret=<password deleted> host=dynamic callerid="Karen" <691> defaultip=192.168.69.251 dtmfmode=rfc2833 mailbox=901
---------------------------------------
Although when I first start asterisk up I always get this 1 error that I am
not sure about.
chan_sip.c:681 retrans_pkt: Maximum retries exceeded on call [EMAIL PROTECTED] for seqno 102 (Non-critical Request)
James
Hello James,
There is nothing special with the Snom phones. The empty dialplan string is normal. You only have to specify the displayname, account, password and registrar. I think you have a mistake in your extensions.conf. Does it work with another (soft)phone?
Regards, Joris
On Oct 15, 2004, at 1:51 PM, James Bean wrote:
I am having a problem with my new SNOM190 and my asterisk box.
Incoming calls to the SNOM work perfectly, but when i dial-out I get a "Not Found: <number dialed>" on the SNOM display everytime I try, nothing shows up on the console of the asterisk box so its not even touching it.
I have the latest 3.54 firmware on it and when I looked at the Line 1 setup for my asterisk box I released that in the SNOM phone there is nothing in my "Dial-Plan String" I take it it matches this inside the phone to choose which line to use in the SNOM phone.
Unfortunately I am not finding much on the format of the Dial-Plan String in the SNOM phones.
All I need is for it to send all calls regardless of format to the asterisk box.
Anyone got any suggestions.
James
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
