Re: [Asterisk-Users] Type of T1 for T100P card

[Josh Roberson]

Cirelle Enterprises wrote:
----- Original Message ----- 
From: "Pedro Aguayo" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, October 27, 2004 6:18 PM
Subject: [Asterisk-Users] Type of T1 for T100P card

| I'm currently setting up a PBX system using the T100P card, and was 
| wondering if it can handle the 2-way trunk type of T1s. Do 2-way trunk 
| T1s use RBS signaling?
| Please excuse my ignorance, I have mostly dealt with PRI B and D channel 
| type of T1s.
| 
| Thanks
| 
| Pedro

I found out by taking the long way around, the t100p requires the t1 pri
hybrid isdn bchan, dchan  A standard 24 timeslot t1 will not work.
regards
greg
 

I apologize if i'm not understanding exactly wtf you're saying here, but 
if i'm reading this correctly, I COMPLETELY disagree.

I have MANY instances of t100p's on a normal 24 channel t1 (rbs),  and a 
few on PRI's using standard B and D channels. It will work fine as long 
as it's configured properly.

-Josh
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users