I agree...T1's in Asterisk do RBS (like E&M for example), T1, PRI, etc. You can even have it emulate regular loop start lines and push them through a standard channel bank and it will just use ls signalling. It is all in how you configure the channels in zaptel and zapata.
Brian On Wed, 27 Oct 2004 17:27:29 -0500, Josh Roberson <[EMAIL PROTECTED]> wrote: > Cirelle Enterprises wrote: > > > > >----- Original Message ----- > >From: "Pedro Aguayo" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Wednesday, October 27, 2004 6:18 PM > >Subject: [Asterisk-Users] Type of T1 for T100P card > > > > > >| I'm currently setting up a PBX system using the T100P card, and was > >| wondering if it can handle the 2-way trunk type of T1s. Do 2-way trunk > >| T1s use RBS signaling? > >| Please excuse my ignorance, I have mostly dealt with PRI B and D channel > >| type of T1s. > >| > >| Thanks > >| > >| Pedro > > > >I found out by taking the long way around, the t100p requires the t1 pri > >hybrid isdn bchan, dchan A standard 24 timeslot t1 will not work. > > > >regards > >greg > > > > > > > I apologize if i'm not understanding exactly wtf you're saying here, but > if i'm reading this correctly, I COMPLETELY disagree. > > I have MANY instances of t100p's on a normal 24 channel t1 (rbs), and a > few on PRI's using standard B and D channels. It will work fine as long > as it's configured properly. > > -Josh > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
