This is a possible near future situation of ours: 10 different bandwidth providers, each providing 2 T1s. 15 different call carriers about the US.
Each BW provider has its own Cisco 2610 into which the T1s go. Then 1 ethernet cable from each router goes into * box. If caller A needs to go to carrier 1, can * tell how many calls are already on ethernet cable #2? Cause if ether #2 (the default) is full/close to full, * needs to send caller A to carrier 1 via a different ethernet port/provider. Any one in a similar situation with multiple bandwidth providers? How do you handle BW choice? Normally this would be done in a router. But the routers don't handle "calls", they handle "packets". So if the router sends packet #1 of call #1 out 1 provider and packet #2 out another, you get jitter. Help/Advice appreciated. Thanks, Matthew _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
