> -----Original Message----- > From: Matthew Boehm [mailto:[EMAIL PROTECTED] > Sent: Thursday, October 28, 2004 12:27 PM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Multiple Bandwidth Providers and Asterisk > > > Each BW provider has its own Cisco 2610 into which the T1s > go. Then 1 ethernet cable from each router goes into * box. > > If caller A needs to go to carrier 1, can * tell how many > calls are already on ethernet cable #2? Cause if ether #2 > (the default) is full/close to full, * needs to send caller A > to carrier 1 via a different ethernet port/provider. > > Any one in a similar situation with multiple bandwidth > providers? How do you handle BW choice? > Just to make sure I understand:
You want to know how to load balance your bandwidth among a number of ethernet interfaces with the emphasis on making sure that once a connection is established that it will use the same interface, right? If so here are a couple of links: * http://lartc.org/howto/ - Linux Advanced Routing & Traffic Control Howto * http://lartc.org/howto/lartc.rpdb.multiple-links.html - Specific page regarding multiple links If that isn't your goal please disregard. Good luck, Robert Jackson _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
