On Nov 3, 2004, at 5:32 PM, Scott Nelson wrote:
My employer is switching to a new T1 supplier (it was AT&T, we are now going
with XO), and sometime in the future we want to replace our PBX with an
Asterisk system.
What do I need to know to make sure the T1 line is "provisioned" (is that the
right term?) correctly for a Digium T100P/TE410P/TE405P?
They will split the T1 line into 10 channels of voice and 14 channels of data.
From what I understand, they will terminate the T1 into a channel bank, and
then from that give is 10 POTS phone jacks and one data port (to go to an
Adtran router for our Internet access).
Any comments and/or suggestions?
Scott _______________________________________________
Scott,
you can skip the channel bank & router, and use asterisk with a T100P to
serve your data & voice. You can find all the info you need on the Wiki
http://www.voip-info.org/tiki-index.php? page=Asterisk%20Data%20Configuration
I use this setup for 11 voice channels and 256K of data from Nuvox. Niles
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
