I know we have sold XO integrated access voice /data to customers that used PRI interfaces on their PBX, so you should be able to order the voice provisioned as follows;
ISDN/PRI NI-2 (national ISDN 2)Format (ATT 5ESS Will also work) Transmit at least 4 numbers on DID Order a block of DID numbers on the circuit large enough to assign one to every extension plus some extras for future (request a contiguous block of numbers) B8ZS coding ESF Framing Their channel bank should hand off Ethernet for data and PRI for voice, not POTS. Interface with * using a single span T1 Digium card (T100P?). You will need to replace FXO interfaces you have them. The digital signaling and DID are features you want to have. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Nelson Sent: Wednesday, November 03, 2004 3:32 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] What do I need to ask my T1 supplier? My employer is switching to a new T1 supplier (it was AT&T, we are now going with XO), and sometime in the future we want to replace our PBX with an Asterisk system. What do I need to know to make sure the T1 line is "provisioned" (is that the right term?) correctly for a Digium T100P/TE410P/TE405P? They will split the T1 line into 10 channels of voice and 14 channels of data. >From what I understand, they will terminate the T1 into a channel bank, and then from that give is 10 POTS phone jacks and one data port (to go to an Adtran router for our Internet access). Any comments and/or suggestions? Scott _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
