I'm using kern 2.6.5-1.358 I'll try out chan_misdn. Hopefully I'll have better luck with that.
Regards Christiaan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Thomas Jagoditsch Sent: Thursday, November 18, 2004 2:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] mISDN & kernel 2.6.9 hi christiaan. Christiaan Brink schrieb: >I'm currently busy on a similar application with a hfc-card. However, my >needs is to interface the ISDN card in NE-mode with the operator. If tried >using Hisax but ran into a problem with the voice quality being bad in one >directions. > >How did you manage to get chan_capi going for BRI ISDN hfc card. Any advice >please!!!!! Are the drivers built in? Or is it necessary to download them? >Or are they included with chan_capi? > >It is likely that I will get the same errors as you are getting and then we >can put our heads together in solving them > sorry, but i use chan_capi with the avm B1 card (this is an active one, different then a A1/fritzcard), see my posting. i see no way to use a hfc-based card or an avm A1/fritz with chan_capi. so IMHO you need not chan_capi but chan_misdn (or alternatively zaphfc - which despite trying hard i couldnt compile with the 2.6.9 kernel :-( ) maybe u could try chan_misdn (see the links in my previous post) for pstn. would be nice to know that mISDN works at least for TE-mode. btw. which kernel do you use ? wbr.tja... _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
