On Thu, 2004-11-18 at 15:10, Leandro Morgado wrote: > Thomas Jagoditsch wrote: > > > hi christiaan. > > > > Christiaan Brink schrieb: > > [snip] > > > sorry, but i use chan_capi with the avm B1 card (this is an active > > one, different then a A1/fritzcard), see my posting. > > i see no way to use a hfc-based card or an avm A1/fritz with chan_capi.
The only way of getting a hfc-based card to work in TE mode not using HiSax is bristuff/zaphfc. I have not checked with mISDN. > > so IMHO you need not chan_capi but chan_misdn (or alternatively zaphfc > > - which despite trying hard i couldnt compile with the 2.6.9 kernel :-( ) I works without problems on 2.4, if you are on Debian i even have zaptel-source modules packages that include zaphfc, that also should be able to compile on 2.6 (not tested though) > It is possible to use an AVM Fritz (in TE mode) with chan_capi. I've > done it myself and it works great. It's documented pretty well in the > wiki. You'll need to compile the kernel drivers from AVM and have capi > support in the kernel for it to work. I could not get the Fritz working > with hisax (in fact I had to remove hisax!) . Again, check the wiki.. > It's all there. :) I had the fritz running on mISDN in TE-mode (2.4 kernel) and everything beyond the capi part was working. I simply didn't get any call signalling on capi, but on the tty's i could see them. Using the AVM binary capi drivers works extremely well and reliable with the A1/Fritz! cards. -- Sl�n leat, Martin List-Petersen Dublin, Eire (contact info on --> http://www.marlow.dk/) _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
