[Asterisk-Users] zap fxo hangs after upgrade to stable v1-0

[Jason Kawakami]

so i have been running v1-0 on all of my test boxes for about a month now 
testing iax/sip/res_xxx.  I decided to put it into production so I updated a 
box that was running 0.9.? that had been working perfectly for months and 
low and behold the inbound line from telco now intermittantly doesn't clear 
and none of the other channels can dial out on that line.  I have tested the 
line in this state and it is closed (from telco) but * reports at the CLI 
that it cannot create a channel of type zap because everything is congested 
at this time.  The line is a loopstart line from Qwest (yeah I know, no 
supervision etc, but it was working fine b4).

I am totally at a loss as to where to go from here.  Any suggestions would 
be appreciated.

zapata.conf
[channels]
usecallerid=yes
callwaiting=no
callwaitingcallerid=no
threewaycalling=yes
transfer=yes
cancallforward=yes
callprogress=yes
rxgain=0.0
txgain=0.0
group=1
immediate=no
context=incoming
signalling=fxs_ls
channel=1
zaptel.conf
fxsls=1
fxoks=2
fxoks=3
loadzone = us
defaultzone=us
[dialout]
exten => _9NXXXXXX,1,StripMSD,1
exten => _NXXXXXX,2,Dial(Zap/1/w${EXTEN})
exten => _NXXXXXX,3,Hangup
Thanks
Jason Kawakami
www.optellabs.com
Salt Lake City, UT 

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users