Fernando,
I experienced some problems like you reports now, and I solved making an upgrade to the OS. Redhat 8.0 has an old kernel and there are some issues about disk access that can cause that problem. There is no enough kernel upgrades on RH8 to fix it, so try to move to Fedora Core 1 and everything will be better.
Alfred Certain GECKO
http://www.gecko-soft.com
Dr. Fernando Mac�as Garza wrote:
I've been running Asterisk for months with no problems. I have grown to the point where I need an aditional TE cards. After many attempts I was able to add the second card without affecting the performance of the first. However, the second card is not working properly.
Setup =====
- Running on a Dell Server.
- RedHat 8
- Asterisk 1.0
- I have two TE410Ps on that box, card 0 assigned to IRQ 4 and card 1 assigned to IRQ 3.
- The rotary switch on both cards is set to 0.
- I have tried setting the switch on card 1 to other than 0, but it does not work (what is the switch for??)
- Both cards have 3 E1 spans and one T1, both in the same order.
- Card 0 has worked well for months, and works well even now that card 1 is installed.
- zttool finds the 2 cards.
Interrupts are as follows:
CPU0 0: 1382239 XT-PIC timer 1: 4177 XT-PIC keyboard 2: 0 XT-PIC cascade 3: 2659119 XT-PIC t4xxp 4: 2659098 XT-PIC t4xxp 8: 1 XT-PIC rtc 10: 200713 XT-PIC eth0, eth1 11: 0 XT-PIC ide2 12: 20 XT-PIC PS/2 Mouse 14: 12541 XT-PIC ide0 NMI: 1 ERR: 0
Problems ========
- Choppy voice on calls between channels of card 1. - Even worse on calls between card 0 and card 1. - Card 0 behaves well. - IRQ misses for card 1. Have tried different interrupts. Same thing. - HDLC overrun messages on console for card 1.
Strange fact, may be the cause of the problem =============================================
Configuration for first span on card 1 is:
span=5,1,0,ccs,hdb3 bchan=118-132 dchan=133 bchan=134-148
However, zttool reports card as "Internally Clocked". No matter how I've tried, I cannot get card 1 to clock from the external source:
Sync Source: Internally clocked
First span on card 0 is configured just the same:
span=1,1,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31
This card gets clocked OK: Sync Source: TE410P (PCI) Card 0 Span 1
Thanks in advance
Fernando
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
