> I'm looking at the Sayson 480i or the Cisco CP-7960. Which one would you > suggest and why please ?
I "briefly" tested the 480i a couple of weeks ago. Had a problem in that it would not use the tftp server address contained in the dhcp response, so had to define everything from the keypad to make it work. The quality of the audio was good, the speakerphone function worked, and all other very basic phone functions that I tried (not an expensive test at all) worked as expected. There seemed to be a lot of "this function will be implemented in a later software release" kind of thing going on. I did not write down the s/w version that it was running, but I do remember there were two additional releases available after the one I had. I would not deploy this phone in large quantities at this time as they would be a support nightmare. For small quantities, not a bad phone at all. That's about all I can tell you on it. I use a 7960 for day to day business use and like it very well. It feels like a phone, works like a phone, excellent speakerphone, and continues to function well. Probably a little over priced these days. I'll stay with it for now. You should probably dig through the wiki as I'm sure there is more detail there on lots of different phones. Rich _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
