> Yeah, proper crossover cable. I've eliminated all cabling issues with > the T1 analyzer. I get a full and accurate pattern back when I test > from the cable end where it would have been connected into the T100P, > with the channel bank in loopback. The main symptom is that when I > hook the analyzer directly to either the channel bank or the T100P, > neither is providing clock. I could have the channel bank supply one, > but I will have fax/modem calls bridged between the two PCI cards, so > a common clock is best. The most disturbing thing is that the T100P, > as the only card in a system, provided clock just fine. > > There was a thread last month in -dev about being unable to use common > clock source across cards. Is this related? How can one cause zaptel > to provide ref clock? Should I be seeing 1000 interrupts/sec on any > and all TDM cards?
Help me understand what you mean by "neither is providing clock". By definition, every single T1 provides clocking within the transmit side of a T1. Its embedded in the data stream and you can't turn it off. Are you talking about clock "sync"? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
