On Mon, Dec 06, 2004 at 10:11:56PM +0000, Corvin wrote: > I am sitting on thos problem whole day I have never ISDN > card in my life. Now I have to runn asterisk with 4 cards very quickly. > > I have installed chapi_chan and now I pached and recompiled kernel 2.8.1 > for mISDN but I don't know how to check that cards are working and should > look next step > > Thanks again for any help I'm Asterisk newbie.
There is a Linux 2.6 and mISDN HowTo: http://rcum.uni-mb.si/~uvp00845b/ In this text the avmfritz module is used. In case of one hfc card it should be: modprobe hfcpci protocol=0x2 layermask=0x1f If you want to use chan_capi, it has to be TE mode. NT mode is not possible. Hfc based ISDN cards will generate lots of interrupts. Interrupt sharing will cause problems. A solution would be to use a quadBRI card instead of the 4 HFC cards and bristuff instead of misdn/chan_capi. -- Stefan Tichy <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
