> > I have a Cisco 7960 phone. I cannot seem to use the settings button > > to get > > into the phone to change the TFTP server. I've set up a DHCP Server, > > TFTP > > Server with the same address, and the phone requests the address of > > 0.0.0.0, > > the server offers the address of 192.168.2.2, but the phone seems not > > to > > take it. > > > > I have no action on the TFTP side. > > > > So, since I can't seem to server the phone anything by TFTP, and I > > can't use > > the settings button, then I thought I might make a console cable (see > > below). I tried to use hyperTerminal, but got no response from the > > phone. > > I don't think the 7960 has a console port on it, just ports for > Ethernet (2), handset, headset, and 7914. The 7914 port is probably a > serial link of some sort, but you won't get where you want by trying to > talk to it via hyperterminal. I'd suggest trying a different DHCP > server or adjusting its settings. It worked just fine for me out of > the box.
The 7960 does have a serial console port but I've never attempted to use it, so not a clue what it expects to see. Most Cisco hardware console ports default to 9600 no parity, 1 stop bit, no hardware flow control. Might try that. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
