On Sat, 18 Dec 2004 09:09:29 -0500, Michael wrote: >I did Asterisk consulting in Sydney for about a year and never had any >issues with DTMF and the X100P. I didn't have to do anything special, >changes to code or standard settings. I wonder if you have a faulty card? > >Michael
gee, basically thema e same answer I was about to give. I have use the x100p, also previously the Netjet for BRI, and now the TE405p for PRI. The Netjet, I got Guy from Travsere to do the voice code at the time.... On the FXS side I have used the Quicknet cards (both linejack and phone jack) , The USB (S100u ?) and the TDM400 series..... no great problems with any of them. Up until recently I also had a T100p in service connected to a Zhone channelbank, unfortunately the zhone seems to have gone to lala land, so I am in the market for another channel bank.... (Which here in Ausralia isn't easy to obtain..... Gary >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Howard Lowndes >Sent: Saturday, December 18, 2004 6:12 AM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [Asterisk-Users] X100P card in Australia > >On Sat, 2004-12-18 at 21:26, Gary wrote: >> Funny, I am probably more remote than you Howard and I have never had >> any problem with the >> x100p (or clones) I have been using for probably the last 2 years... >> > >So, what's the secret to getting dtmf to work properly. > >> On Sat, 18 Dec 2004 21:15:51 +1100, Howard Lowndes wrote: >> >> >Well, it appears that the good old days of crossbar technology are not >> >yet lost. >> > >> >I tried using "pulsedial = yes" in zapata.conf, and it worked. Shame >> >really that dtmf doesn't work properly in AU. Perhaps the 1 exchange >> >that I was successful with earlier was an old AXE exchange - who would >> >know. >> > >> > >> >On Sat, 2004-12-18 at 19:10, Howard Lowndes wrote: >> >> Further to this, I have just managed to make an outbound call, but it >is >> >> only 1 out of a number of phone numbers that I have tried, so I still >> >> have the problem. >> >> >> >> The call I did succeed in making was of very acceptable quality. >> >> >> >> >> >> On Sat, 2004-12-18 at 18:42, Howard Lowndes wrote: >> >> > I'm trying to get the X100P card working in AU. >> >> > >> >> > So far I have managed to get it to handle incoming calls from the >PSTN >> >> > and have managed to eliminate pretty much most of the echo. >> >> > >> >> > My big problem is getting the outbound calls to work. When I get ZAP >to >> >> > dial out it won't connect and I get what I think is the Congestion >> >> > signal - like a busy signal but with what appears to be a 10db >> >> > alternating gain shift. >> >> > >> >> > (From zaptel/zonedata.c) >> >> > { ZT_TONE_BUSY, "425/375,0/375" }, >> >> > { ZT_TONE_RINGTONE, "413+438/400,0/200,413+438/400,0/2000" }, >> >> > /* XXX Congestion: Should reduce by 10 db every other cadence XXX */ >> >> > { ZT_TONE_CONGESTION, "425/375,0/375,420/375,8/375" }, >> >> > >> >> > Has anyone in AU got this outbound working on X100P and can give me >some >> >> > pointers. >> >-- >> >Howard. >> >LANNet Computing Associates; >> >Your Linux people <http://www.lannetlinux.com> >> >------------------------------------------ >> >"When you just want a system that works, you choose Linux; >> >when you want a system that just works, you choose Microsoft." >> >------------------------------------------ >> >"Flatter government, not fatter government; >> >Get rid of the Australian states." >> > >> > >> >_______________________________________________ >> >Asterisk-Users mailing list >> >[EMAIL PROTECTED] >> >http://lists.digium.com/mailman/listinfo/asterisk-users >> >To UNSUBSCRIBE or update options visit: >> > http://lists.digium.com/mailman/listinfo/asterisk-users >> >> . >> >> >> _______________________________________________ >> Asterisk-Users mailing list >> [EMAIL PROTECTED] >> http://lists.digium.com/mailman/listinfo/asterisk-users >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >-- >Howard. >LANNet Computing Associates; >Your Linux people <http://www.lannetlinux.com> >------------------------------------------ >"When you just want a system that works, you choose Linux; >when you want a system that just works, you choose Microsoft." >------------------------------------------ >"Flatter government, not fatter government; >Get rid of the Australian states." > > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users . _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
