I'm having similar problems with my Grandstream BT-100 SIP phone. I've
removed the fromuser=1234 from the sip.conf file but the phone still shows
1234 in the display when getting a call. I can see the incoming PSTN CID in
the log file but for some reason its not passing this to the phone. The CID
looks something like:
"Joe Somebody" <7035551212>
Others have stated that the BT-100 can't take characters, only numbers so I
would assume there's a function like SetCIDNum(${CALLERID}) to extract the
number and send it to the BT-100. Can anyone that has the CallerID working
post their setup/configs so I can see what I'm doing wrong?
Thanks,
Dave
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of George
Gardiner
Sent: Wednesday, October 27, 2004 12:31 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [Asterisk-Users] Grandstream and CallerID - sorted
Thanks to everyone for their help.
I sorted out my CallerID problem - I had a stray "fromuser=101" command in
my sip.conf which was overwriting any CallerID info. It was a process of
elimination (on my part) helped by all the comments I had back.
Regards,
George
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
