Ken Godee wrote:
I'm currently playing with a Digium T100P card and 2 Grandstream phones, things are working well. I wanted to move on to linking our Definity G3R Rev 8.2 to the T100P. Everything that I've read so far shows that you need a TN464 to accomplish this. We have a TN767E available.
Ken, and anybody else with some input.
Today the network administrator and I had around an hour free and tried to do the link up between the Definity PBX and the Asterisk box using the TN767E CSU/DSU. The version of Asterisk that I'm using is:
Asterisk CVS-v1-0-11/23/04-15:27:13 built by [EMAIL PROTECTED] on a i686 running Linux
The hardware is a Wildcat T100P. The drivers load fine and I get a green light between the T100P and CSU/DSU. The errors on the CSU/DSU clear except 1 warning.
The phone admin wasn't able to get it working, following your instructions and had the following questions:
"What OS Release of Phone System were you using to do the setup? Which ISDN options are enabled under customer options?
Problems:
Change communications-interface links is controlled by adding the data-module. I'm unable to specify ISDN as the protocol.
Under change communications-interface processor-channels I can not select ISDN as the Appl."
Any help appreciated,
Doug
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
