Progressinband=yes under [general] in sip.conf NEXT!!!
- Joshua Colp. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave DeChellis Sent: Tuesday, December 28, 2004 8:57 AM To: [email protected] Subject: [Asterisk-Users] Asterisk / 183 message Hello, My company is doing some * testing with our Class 5 softswitch and had some questions regarding ringback being provided to our PSTN users (off --> on net calling) Currently with MGCP subscribers, we know the PSTN ringing is provided by a digital PBX for example, However, it looks like with SIP, our softswitch is relying on MGCP signaling on our PSTN gateways to provide ringback to the PSTN network - this makes complete sense (gateway to PSTN gets a S: rg). The problem is that some of our older gateways don't support MGCP event signaling, so I was trying to get Asterisk to send all SIP calls to our switch with a "183" message so maybe our switch will cut the call through two-way immediately. Currently Asterisk is sending 180/ringing messages to our switch. Is there a way to have Asterisk send 183 messages to my peer defined in sip.conf ? Thanks, Dave _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
