On Thu, 30 Dec 2004 09:04:32 -0800, Steven P. Donegan wrote: >Kristian Kielhofner wrote: > >> Steven P. Donegan wrote: >> >>> I have a Sipura 3000, apparently configured correctly, when incoming >>> calls arrive on the telco port they arrive properly on the Asterisk >>> system - however they don't get routed properly. The Asterisk message: >>> >>> Dec 30 07:47:16 NOTICE[2745]: chan_sip.c:7486 handle_request: Failed >>> to authenticate user WIRELESS CALLER >>> <sip:[EMAIL PROTECTED]>;tag=7f8072c0c46250f7o1 >>> >>> X's are there to not advertise my phone number :-) >>> >>> Any idea as to why any kind of authenticate would be done or would >>> fail would be appreciated. >> >> >> Steven, >> >> It really seems like you need to setup an entry in sip.conf that >> "PSTN Line" on the sipura can register with. Do you have an entry in >> sip.conf for it? How is "PSTN Line" programmed? >> >> -- >> Kristian Kielhofner >> _______________________________________________ >> Asterisk-Users mailing list >> [email protected] >> http://lists.digium.com/mailman/listinfo/asterisk-users >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> >Here is sip show peers: > >www*CLI> sip show peers >Name/username Host Dyn Nat ACL Mask Port >Status >1004/1004 1.0.24.223 D 255.255.255.255 5060 >Unmonitored >1003/1003 1.0.24.223 D 255.255.255.255 5060 >Unmonitored >1002/1002 1.0.24.222 D 255.255.255.255 5061 >Unmonitored >1001/1001 1.0.24.222 D 255.255.255.255 5060 >Unmonitored >1000/1000 (Unspecified) D 255.255.255.255 0 >Unmonitored >5 sip peers loaded [4 online , 1 offline] > >Which seems to say the Sipura is registered... > >Here is sip.conf: > >[EMAIL PROTECTED] asterisk]# cat sip.conf >[general] >port = 5060 ; Port to bind to >bindaddr = 0.0.0.0 ; Address to bind to >context = default ; Default for incoming calls > >[1000] >type=friend >username=1000 >fromuser=1000 >host=dynamic >nat=no >canreinvite=yes >dtmfmode=rfc2833 >[EMAIL PROTECTED] >disallow=all >allow=ulaw > >[1001] >type=friend >username=1001 >fromuser=1001 >host=dynamic >nat=no >canreinvite=yes >dtmfmode=rfc2833 >[EMAIL PROTECTED] >disallow=all >allow=ulaw > >[1002] >type=friend >username=1002 >fromuser=1002 >host=dynamic >nat=no >canreinvite=yes >dtmfmode=rfc2833 >[EMAIL PROTECTED] >disallow=all >allow=ulaw > >[1003] >type=friend >username=1003 >secret=1003 >canreinvite=no >host=dynamic >dtmfmode=rfc2833 >mailbox=1003 >nat=no >disallow=all >allow=ulaw > >[1004] >type=friend >username=1004 >secret=1004 >canreinvite=no >host=dynamic >dtmfmode=rfc2833 >mailbox=1004 >nat=no >disallow=all >allow=ulaw > >[EMAIL PROTECTED] asterisk]# > >Not sure what I'm doing wrong but any suggestions would be welcomed. > >And BTW - Happy Hollidays!
When I used the SPA-3000 I had to setup a special context in extensions.conf and then use a "hotline" dialplan setup in the SPA. This caused all calls incomming on the POTS line to immediately be forwarded to the Asterisk context. I essentially bypassed the SPA diaplan logic. You can find out more about this at www.voxilla.com which hosts a forum for SPA users. Michael -- Michael Graves [EMAIL PROTECTED] Sr. Product Specialist www.pixelpower.com Pixel Power Inc. [EMAIL PROTECTED] o713-861-4005 o800-905-6412 c713-201-1262 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
