Not knowing where you are or your local telco, a lot use battery removal for disconnect and ls ignores that and ks sees and disconnects on that signal.
Lyle ----- Original Message ----- From: "Adi Linden" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Thursday, December 30, 2004 12:04 PM Subject: Re: [Asterisk-Users] Voicemail and Zapatel > On Thu, 30 Dec 2004, Lyle Giese wrote: > > > Is your X100P set for loop start or Kewl Start? I am betting loop start, > > try changing to ks instead. > > > > Lyle > > This is what I have in /etc/asterisk/zapata.conf so it should be Kewl > Start. > > [channels] > ; X100P > signalling=fxs_ks > echocancel=yes ; You can set this to 32, 64, or 128, > ; tweak to your needs. > echocancelwhenbridged=yes > echotraining=400 ; Asterisk trains to the beginning of the call, > ; number is in milliseconds > usecallerid=no ; This cause Asterisk to answer the call > immediately > ;callerid=asreceived > context=inbound-pstn-local > group=1 > channel => 1 > > Adi > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
