|
Hi all,
I'm trying to install a TDM400P card, and I need some
help.
Please, see below...
after dmesg command:
[EMAIL PROTECTED] root]# dmesg
via82cxxx: board #1 at 0xD800, IRQ 5 Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 3 for device 00:09.0 PCI: Sharing IRQ 3 with 00:10.1 Freshmaker version: 71 Freshmaker passed register test Module 0: Installed -- AUTO FXS/DPO Module 1: Installed -- AUTO FXS/DPO Module 2: Installed -- AUTO FXO (FCC mode) Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) after [EMAIL PROTECTED] root]# asterisk -vvvvcp
command:
[chan_phone.so] => (Linux Telephony API
Support)
== Parsing '/etc/asterisk/phone.conf': Found == Registered channel type 'Phone' (Standard Linux Telephony API Driver) [chan_zap.so] => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found Jan 6 14:57:50 WARNING[-1084944256]: chan_zap.c:665 zt_open: Unable to specify channel 1: No such device or address Jan 6 14:57:50 ERROR[-1084944256]: chan_zap.c:5340 mkintf: Unable to open channel 1: No such device or address here = 0, tmp->channel = 1, channel = 1 Jan 6 14:57:50 ERROR[-1084944256]: chan_zap.c:7377 setup_zap: Unable to register channel '1-2' Jan 6 14:57:50 WARNING[-1084944256]: loader.c:313 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Segmentation fault [EMAIL PROTECTED] root]# Please, see .conf files
below:
zaptel.conf
fxoks=1-2
fxsks=3-4
loadzone = us
defaultzone=us
zapata.conf
[channels]
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=3.5
txgain=3.5
immediate=no
busydetect=yes
busycount=5
callprogress=no
usecallerid=yes
hidecallerid=no
;calleridcallwaiting=yes
callerid=asreceived
musiconhold=default
relaxdtmf=yes
accountcode=pstn_local
amaflags=billing
echotraining=yes
context=fxs ;Context to
FXS ports
group=1
signalling=fxo_ks
channel=1-2
context=fxo ;Context to
FXO ports
group=2
signalling=fxs_ks
channel=3-4
extensions.conf
[fxs]
exten => 100,1,Dial,Zap/1
exten => 100,1,Dial,Zap/2
exten =>
_9X.,1,Dial,Zap/3/${EXTEN:1}
[fxo]
exten => s,1,Dial,Zap/4
thanks
C�sar
|
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
