This can happen if the (mac-addr).cfg file is bad. The first time you load the phone it will corrupt the flash and you will have to send the phone in for repair. Make sure when you edit the file you don't add any carriage returns...
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Aryeh Sent: Sunday, January 16, 2005 11:19 AM To: [email protected] Subject: [Asterisk-Users] Looking for help with a Polycom Soundpoint IP 600 Hi all, I have a Polycom Soundpoint IP 600 that looks like it is fried. It either has a bad or corrupt bootrom (I'm guessing). It never gets to the prompt that asks if I want to enter the setup configuration or continue booting. When plugged into power, it turns on, shows the Polycom logo for 3 seconds and then pretty much goes dead with two red lights on. The one in the top right corner and the one in the top left (the line 1 red light). Anyone have any clues as to what to do? I'm looking into finding a polycom service center or reseller that is in or close to New York City. Anyone know of any places that can simply connect up to the phone and reflash the rom and firmware. I'm guessing it's a 5 min fix with the right equipment. Any help would be appreciated. Thanks guys. aryeh _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
