----- Original Message -----
Sent: Monday, January 17, 2005 6:12
PM
Subject: [Asterisk-Users] transfers
with zap channel
Ok, I've seen discussion before on doing
transfers (attended and unattended), there seems to be much confusion over
it.
As things sit, I've been trying
(unsuccessfully) to do transfers with a zap channel (analog phone attached
to TDM400). I have no idea what I'm missing. My current
understanding is that I need to have transfer=yes in zapata.conf, do a
flash hook, dial the 2nd number, flash hook again and we're linked
(attended). Then if I hang up the call will be
transfered.
However, when I try to do this things don't
work. Here's what I do:
- connection is made between Zap/3 (analog
phone) and Zap/1 (outside line).
- flash hook to get dialtone (I do get
dialtone)
- attempt to transfer to extension 7007 - I
dial 7007
- after dialing the 2nd zero, and before
dialing the 2nd seven, I hear Asterisk announce (seven - zero - one) and
then Zap/3 is hung up (I get a busy signal). Zap/1 gets
parked.
Here's what the log shows:
-- Zap/1-1 answered
Zap/3-1
-- Attempting native bridge of Zap/3-1 and
Zap/1-1
-- Started three way call on channel
1
-- Started music on hold, class 'default', on
Zap/3-1
-- Attempting native bridge of Zap/3-1 and
Zap/1-1
-- Starting simple switch on
'Zap/1-2'
-- Started music on hold, class 'default',
on Zap/3-1
== Parked Zap/3-1 on 701. Will timeout back to
dostuff,7001,1 in 45 seconds
-- Added extension
'701' priority 1 to parkedcalls
-- Playing
'digits/7' (language 'en')
-- Hungup
'Zap/1-1'
== Spawn extension (dostuff, 7001, 1) exited non-zero
on 'Parked/Zap/3-1<ZOMBIE>'
-- Stopped music
on hold on Parked/Zap/3-1<ZOMBIE>
-- Playing
'digits/0' (language 'en')
-- Playing 'digits/1'
(language 'en')
-- Parking call to
'Zap/1-2'
-- Hungup 'Zap/1-2'
-- Stopped music on hold on Zap/3-1
== Zap/3-1 got tired of
being parked
-- Hungup 'Zap/3-1'
I'm not sure what I'm missing.
Apparently something to do with parked calls, so I must be
misunderstanding how do to the call transfer.
I've also tried enabling Asterisk transfer on
the channel (exten => 7010,1,Dial(${CORDLESS},20,tT)).
My understanding of this method is that this
allows one to hit the pound (#) to start a transfer. Yet pound does
nothing. Is it fair to assume that the tT only works on SIP
channels, or am I missing something else.
Any help is much appreciated....
Paul
_______________________________________________
Asterisk-Users
mailing
list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
