Are you using dual PSU's or something? What redundance do you have on your system? Do you use any channel banks? Is it only telco connections on the TE405P? I will use one E1 from the telco, and one from Asterisk to the Adit. Is it enough with one TE405P, or should I use two different cards?
Thanks! ----- Original Message ----- From: "Peter Svensson" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Tuesday, January 18, 2005 3:10 PM Subject: Re: [Asterisk-Users] Prefered server hardware > On Tue, 18 Jan 2005, Daniel Nystr�m wrote: > > > What server hardware would you recommend for an Asterisk system which > > are really critical? The additional hardware will probably be two digium > > TE110P cards, and an Adit 600 platform. > > > > If it's possible to run on -48VDC, It would be great! > > > > Are there any experiences with any HP or FujitsuSiemens systems? Or > > other "complete server" systems? > > We use Fujitsu servers. No observed problems with a single TE405P. A lot > of people have problems with at least one model of HP server. Perhaps you > should try searching the mail archives for the brands you are considering. > > Most brand name servers can be configured with a -48V power supply. > > Peter > > > > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
