I've added a ZAPHFC card to my CAPI based system. Calls coming in via ZAPHFC do not forward the caller id to the SIP phones. Calls coming in via CAPI do forward the caller id to the SIP phones.
-- Accepting call from '1729731418' to '807440' on channel 0/1, span 1 -- Executing Answer("Zap/1-1", "") in new stack -- Executing SetCIDNum("Zap/1-1", "0") in new stack
It does not add the callerid it has two lines above ???
I know there have been some changes to the CID structure sometime within Asterisk. But, this is using the bristuff download and install script.
This isn't helping much but I am using bristuff too and can confirm the problem. I posted a message about it earlier on the list.
It seems like a bristuff problem. I have some other problems with bristuff 0.2 too, if the cable is disconnected even briefly from the line in to the Nt1 the line never comes back up. Also, if i restart asterisk I cannot use the line incoming or outgoing. I have to stop *, unload the drivers, re-load the drivers and fire up asterisk again. This too is a problem I have seen reported on the list by others.
bristuff 0.10 is supposed to be better but has an asterisk from the stone age :)
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
