> Jens, thanks for the feedback.
No problem - but I think I didn't help.
> >>I've added a ZAPHFC card to my CAPI based system. Calls coming in via
> >>ZAPHFC do not forward the caller id to the SIP phones. Calls coming in
> >>via CAPI do forward the caller id to the SIP phones.
>
> > I think you didn't set usecallerid=yes in your zapata.conf?
>
> Added it, rebooted, no change. (Before, I just had pritrustusercid =
> yes, only.)
so I also had this problem that both of those methods didn't work.
Another method to set the callerid is to insert a line like this into
the zapata.conf within the related section.
setcallerid = ("" <${CALLERIDNUM}>)
Normally the way I described before works for me using asterisk 1.02
with bristuff 0.2 on different machines also on one SMP-machine with one
or more HFC-cards in TE- and NT-mode. I also had problems as mentioned
by Michiel when I call ztcfg more than once after loading the modules.
But I think this problem is known because I read about it on some pages.
Jens
--
Jens Lentf�hr
http://www.jens-it.de
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
