Thanks. I guess, I will have to try it and see. Mine is one of those small form factor COMPAQ boxes. I will try to get full specs from COMPAQ/HP.
What about load Asterisk puts on processor if you do, for example, IP-IP call and IP-PSTN call? Since I will use Polycom phones, I will use SIP. Rudolf -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of John Novack ( Mozilla - portable ) Sent: Tuesday, February 22, 2005 11:41 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Minimal hardware requirements Rudolf Ladyzhenskii wrote: >Hi, all > >I am doing "prrof of concept" system. I will have two IP phones connected to >Asterisk box. Box itself will have 1 PSTN conenction and one analog phone >conenction. A basic minimal configuration. > >At the moment I am planning to use an old PII-350 with 128M of RAM I have >lying around. I can not test anything yet, as I am waiting for phones to >arrive, so question is will that be enough to demonstrate? > >Thanks, >Rudolf > > > Depends. If you plan on using the TDM400 with one each FXS and FXO, the MB needs to have PCI Ver 2.2 slots, or the card won't be seen Any MB made after 2000 probably is OK John Novack _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
