I have two comments: a. It maybe doesn't work because of the PCI specifications the box support. If was manufactured before Jan 2000, it is quite probably that it won't recognize the Digium cards. b. From the point of view of load, I see no problems, I think the specs of the machine are enough for such a small system. Hope it helps.
Marco -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Rudolf Ladyzhenskii Sent: Monday, February 21, 2005 6:35 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Minimal hardware requirements Hi, all I am doing "prrof of concept" system. I will have two IP phones connected to Asterisk box. Box itself will have 1 PSTN conenction and one analog phone conenction. A basic minimal configuration. At the moment I am planning to use an old PII-350 with 128M of RAM I have lying around. I can not test anything yet, as I am waiting for phones to arrive, so question is will that be enough to demonstrate? Thanks, Rudolf _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
