On Wed, Feb 23, 2005, Kevin P. Fleming wrote: > >Both end are configured for ccs hdb3. For clock, I used > >span=1,1,0,ccs,hdb3 > > > >As I understand this means that the card will get its synchronization > >source from the other end right? And at the other end I have configured > >the equipment to take its source from the system clock, or from another > >E1 link. None of them removed the LOF alarm on the link to my asterisk > > That looks to be correct. Have you done any loopback testing to make > that the TE410P is working correctly, and that the E1 ports on the other > equipment are working correctly?
I guess I need some special equipment to do the tests, right? Unfortunately I don't have any such tool :( Maybe I can try to connect the card to some other E1 equipment. One question: I'm not sure if this equipment requires a "cross" or a straight cable. I tried with a straight one, and since I got the green LED I assumed it was correct. But could it be that I need to cross the cable? I mean send pin 1 and 2 to 4 and 5? If so would the green LED be lit? Thanks, Johan. Thanks, Johan. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
