>Here is a sample of our zaptel.conf config as it was handed to me (I >inherited this Asterisk project, btw). These configs are likely a train >wreck, so if anybody could possible either generate a config that would >work, or explain a somewhat laymens terms how I can go about making a >good config, I'd appreciate it.
>zaptel.conf: >span=1,0,0,esf,b8zs >span=2,0,0,esf,b8zs Try this: span=1,1,0,esf,b8zs span=2,2,0,esf,b8zs Tells the card to pull timing from the telco. >fxoks=1-24 Remove fxoks=1-24, In the setup you described you want to use the last 12 channels of both T1's for voice. This statement tells your card to run all 24 channels of the first T1 for voice. Also it's signaling type would not use a D channel (this statement is used when connecting to a channel bank or PBX that expects fxo). >bchan=12-23,36-47 >dchan=24,48 >loadzone = us >fxsks=49-53 Everything else looks good:) Hope this helps Chris. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
