On 7 Mar 2005, at 14:27, <[EMAIL PROTECTED]> wrote:
I have set up an Asterisk PBX server and can make calls between endpoints using both the SIP and IAX protocols. Iam using X-Lite softphone to make SIP calls and DIAX softphone to make IAX calls. The next step is to get an ISDN line connected and ISDN phone able to make calls to either a SIP or IAX softphone.
So far I have managed to install an AVM Fritz card along with the drivers and CAPI. I can attempt to make a call to a softphone but the call cannot be connected. The Asterisk PBX does process the call and displays the msn that the ISDN phone is tring to call but the softphone does not ring and no call is established.
Any configuration ideas on how I can get this to work? Is there anything I have missed?
Here is a diagrammatical explanation:
PC - Softphone
������� | <x-tad-smaller>Ethernet Line</x-tad-smaller>
Asterisk PBX
������� |<x-tad-smaller> ISDN line</x-tad-smaller>
ISDN phone�����
Any suggestions will be a great help.
You'll need to send us some debug logs and snippets of config files for us to
help you with this problem.
At a pure guess I'd say you need to add some lines to extensions.conf
we will know more if you send more info.
Tim.
http://www.westhawk.co.uk/
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
