> Has anyone got this to work? Under Idle Display Animation, the > administrators guide says "For example, a company logo could be > displayed".. > In the ipmid.cfg file, I enabled 'ind.idleDisplay.enabled' (ie changed > it to 1), and under the IP 500 section, I added an entry for the bitmap > that I want to display: bitmap.IP_500.66.name ="arf" but from there I'm > not sure where to go...what do you change to tell the phone to actually > use that bitmap on the main screen during idle conditions?
Here's what worked for me (after much trial and error): Like you did, enable the idle display and define my own bitmap (astlogo). Then, in the <Animations> <IP_500> block, modify the entry for IDLE_DISPLAY to use the new logo: <IDLE_DISPLAY ind.anim.IP_500.38.frame.1.bitmap="astlogo" ... And lastly, in <gi> <IP_500 ... you need to properly position your logo. Mine is 100x36, so here's my ideal positioning: ind.gi.IP_500.10.physX="51" ind.gi.IP_500.10.physY="6" ind.gi.IP_500.10.physW="100" ind.gi.IP_500.10.physH="36" I *think* this was all that was needed. After rebooting the phone, it will initially display a blank idle display (with a small time/date display). Go into one of the softkey menus (i.e. MyStat or Buddies) and exit back to the main menu: there's your logo. No idea why it wouldn't show initially. Also, contrary to the wiki, my IP500 can display 8-bit bmp bitmaps. The logo I'm using was created as a Windows Bitmap. A 'file' command against the bitmap returns "astlogo.bmp: PC bitmap data, Windows 3.x format, 100 x 36 x 8". -- kuj _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
