Put this in sip.conf with the phpconfig:
register => [EMAIL PROTECTED]:password:[EMAIL PROTECTED]/phone_number
[sip.broadvoice.com]
type=peer
user=phone
host=sip.broadvoice.com
fromdomain=sip.broadvoice.com
fromuser=phone_number
secret=password
username=phone_number
insecure=very
context=from-pstn
authname=phone_number
dtmfmode=inband
dtmf=inband
;Disable canreinvite if you are behind a NAT
canreinvite=no
Then go into AMP and set up your DID number and point it to an extension.
I never could get the SIP in AMP to work properly.
James
On Thu, 10 Mar 2005 18:32:09 -0500, Tom Rymes <[EMAIL PROTECTED]> wrote:
Egad, not again with Broadvoice! Anyhow, I recently installed AAH and configured my TDM11B and got that and some SIP phones working. I still have some issues to work out, etc, but my current problem is Broadvoice.
I have checked out all of the online resources, including the recent list exchange about the recent changes made by Broadvoice. However, the one thing I have found to be consitent in all of the online info is that nothing consistently works....
I have tried to combine the tutorial by William Pool at http://lists.digium.com/pipermail/asterisk-users/2005-January/086337.htm l with the latest instructions from Dan Weber at http://foo.robotics.net/mediawiki-1.3.10/index.php/Asterisk_Setup . This has not worked. Right now, "sip show registry" shows this:
Host Username Refresh State sip.broadvoice.com:5060 [EMAIL PROTECTED] 120 Auth. Sent
I added this to my sip.conf:
externip=xxx.xxx.xxx.xxx localnet=10.1.0.0 localmask=255.255.0.0 nat=yes My /etc/asterisk/sip_additional.conf contains this relevant portion:
register=> [EMAIL PROTECTED]:pppppppppp:[EMAIL PROTECTED]/2 00
[from-broadvoice] username=nnnnnnnnnn user=nnnnnnnnnn type=user secret=pppppppppp nat=yes insecure=very host=sip.broadvoice.com fromdomain=sip.broadvoice.com dtmfmode=inband context=from-pstn
[sip.broadvoice.com] username=nnnnnnnnnn user=nnnnnnnnnn type=peer secret=pppppppppp nat=yes insecure=very host=sip.broadvoice.com fromuser=nnnnnnnnnn fromdomain=sip.broadvoice.com dtmfmode=inband dtmf=inband context=from-pstn canreinvite=no authname=nnnnnnnnnn
Here are my two questions:
1.) Does anyone have a summary of what to input into AMP to properly setup Broadvoice? The tutorial by William Pool looked hopeful, but no such luck.
2.) Can anyone see the painfully obvious screwup I made here? For whatever reason this isn't working, and I can't find any consistent answers on Broadvoice.
Thank you for your consideration, I have been documenting my progress so I can share the results with the community once completed.
Tom
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- James Taylor MetroTel 3505 Summerihll Road Suite 11 Texarkana, Texas 75503 903-793-1956 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
