Strange;
It works for me. The x100p (Digium 100 buck model) I have is slotted for 3.3v and works fine.
I'm running gentoo with udev and the 2.6.11 kernel with soekris patches (udev is cool, coldplug automagically loads the drivers).
The 4801 is flashed with whatever the latest bios is from Sorin. Using a 40G 2.5 inch laptop drive, no CF Card, boot directly from HD.
Asterisk is CVS HEAD.
lspci shows:
0000:00:00.0 Host bridge: Cyrix Corporation PCI Master
0000:00:06.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
0000:00:07.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
0000:00:08.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
0000:00:0a.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface <<-- Digium X100P
0000:00:12.0 ISA bridge: National Semiconductor Corporation SC1100 Bridge
0000:00:12.1 Bridge: National Semiconductor Corporation SC1100 SMI
0000:00:12.2 IDE interface: National Semiconductor Corporation SCx200 IDE (rev 01)
0000:00:12.5 Bridge: National Semiconductor Corporation SC1100 XBus
0000:00:13.0 USB Controller: Compaq Computer Corporation ZFMicro Chipset USB (rev 08)
kernel messages:
Mar 20 22:36:55 ast-soekris Zapata Telephony Interface Registered on major 196
Mar 20 22:36:56 ast-soekris wcfxo: DAA mode is 'FCC'
Mar 20 22:36:56 ast-soekris Found a Wildcard FXO: Wildcard X101P
lsmod: Module Size Used by ohci_hcd 16648 0 wcfxo 11040 0 <------- zaptel 220292 5 wcfxo <----- crc_ccitt 1920 1 zaptel natsemi 23904 0
Did you make your "modem donation" to Digium? :-)
---- John Breeden Hawaii
Matt Ryanczak wrote:
I ended up using a sipura spa-3000 for FXO/FXS. It works great.
http://www.sipura.com/products/spa3000.htm
-Matt
On Mon, 2005-03-21 at 09:40 -0600, John Simon wrote:
This is the same experiance I had with my net4801 and X100P. Do you know of any 3.3V PCI modems that will work with Asterisk?
--- Matt Ryanczak <[EMAIL PROTECTED]> wrote:
I have 2 X100p clones that do not work in the_______________________________________________
net4801. The 4801 will not
even power up with them installed. Both cards work
fine a a standard
desktop PC.
On Sun, 2005-03-20 at 21:58 -1000, John Breeden
wrote:
X100P is 3.3v not 5v, at least the one I have.Works fine in a 4801.
setup? I am looking for aJohn Simon wrote:
Is anyone using a net4801 and an analog only
5.0V PCI only so itmodem that is PCI 3.3V, apparently the X100P is
http://lists.digium.com/mailman/listinfo/asterisk-userswon't work with the net4801.http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected]
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
