the cables are all straight cables but it seems you did not set the jumpers on port4
On Mon, 28 Mar 2005 16:34:18 +0200, Robert Rozman <[EMAIL PROTECTED]> wrote: > Hi, > > I'm trying to connect quadbri between powered ISDN phone and ISDN line: > ISDN <---1---> TE - * - NT <--2--> Phone > > I use quadbri, suse 9.2 and latest 0.2.0-RC7k bristuff. I've used sample > settings provided with package, but do get strange error (I think that I > have wrong setting for P2P or P2MP setting and cables 1 and 2). > > If I connect phone to ISDN with straight cable it works. I've put quadbri in > between, and connected ISDN to span1 in TE mode, and phone in NT mode on > span4. Did configuration (added at the end). I get errors: > > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > qozap: CRC error for HDLC frame on card 1 (cardID 255) S/T port 1 > > I'm not sure what cables to use. I use straight for -1- and -2-. Is this > right ? I'm in European community (EuroISDN) so I guess I should have some > pretty standard connections... > > I have ISDN line with 2 MSNs and two connectors on NT termination - so I > guess this is P2MP. Is this OK ? > > Does anyone have working example for Germany ? > > There is also one strange thing: I get this in dmesg when loading qozap > module, although I have specified 4th port to be NT - and pri show span 4 > shows it in netowork mode: > > Zapata Telephony Interface Unloaded > module zaptel unsupported by SUSE/Novell, tainting kernel. > Zapata Telephony Interface Registered on major 196 > module qozap unsupported by SUSE/Novell, tainting kernel. > PCI: Enabling device 0000:02:0c.0 (0000 -> 0003) > ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 209 > qozap: S/T ports: 4 [ TE TE TE TE ] > qozap: 1 multiBRI card(s) in this box, 4 BRI ports total. > Registered tone zone 3 (Netherlands) > > Thanks in advance, > > regards, > > Rob. > > #--------- /etc/zaptel.conf: > loadzone=nl > defaultzone=nl > # qozap span definitions > # most of the values should be bogus because we are not really zaptel > span=1,1,3,ccs,ami > span=2,0,3,ccs,ami > span=3,0,3,ccs,ami > span=4,0,3,ccs,ami > > bchan=1,2 > dchan=3 > bchan=4,5 > dchan=6 > bchan=7,8 > dchan=9 > bchan=10,11 > dchan=12 > > #--------- /etc/asterisk/zapata.conf > [channels] > > switchtype = euroisdn > > pridialplan = dynamic > prilocaldialplan = local > nationalprefix = 0 > internationalprefix = 00 > usecallingpres=yes > > echocancel = yes > echocancelwhenbridged = yes > echotraining = 100 > > ;------------------------------------------------------------------- > ; p2p TE mode (for connecting ISDN lines in point-to-point mode) > ;signalling = bri_cpe > ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) > signalling = bri_cpe_ptmp > > context=isdn-incoming > group = 1 > > ; S/T port 1-3 (first quadBRI, or lower ports of an octoBRI) > channel => 1-2 > channel => 4-5 > channel => 7-8 > ;------------------------------------------------------------------- > > ; p2p NT mode (for connecting an ISDN PBX in point-to-point mode) > signalling = bri_net > > context=pbx-incoming > group = 2 > > ; S/T port 4 (second quadBRI, or upper ports of an octoBRI) > channel => 10-11 > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Michal Bielicki http://www.asterisk.com.pl/ _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
