|
Ok, I just got my 8 channel setup to dial out and
back in but here is the new issue. It sill dials in fine with all the
channels, but dialing out from inside the asterisk system only works on the 1st
channel of my 1st TDM400P card.
Now I dont have all 8 PSTN lines going into my
asterisk box at this moment, only one line for testing currently, but I should
be able to plug that one line into any of the open channels on the back of the
asterisk box and have it dial out with no problem correct? I can plug the
line into any of the channels and it will take calls into the system just fine
currently, just not call out. It will only call out if the PSTN line is
plugged into the 1st channel on the 1st card.
I need this setup to be able to take incomming
calls or send outgoing calls on any available line at any time! Can
someone clue me in?
Thanks:
Configs:
Zaptel.conf:
fxsks=1-8 loadzone=us defaultzone=us Zapata.conf:
[trunkgroups]
[channels] musiconhold=default
rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callerid=xxxxxx callwaiting=yes busydetect=no callprogress=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=800 rxgain=0.0 txgain=0.0 group=0
callgroup=1 pickupgroup=1 immediate=no ;faxdetect=incoming faxdetect=no signalling=fxs_ks callerid=asreceived context=from-pstn channel=>1-8 |
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
