On Mon, 28 Mar 2005 10:31:56 -0600, Henry Devito <[EMAIL PROTECTED]> wrote: > Hate to bring up an old thread. I just configured a 7960 with multiple > lines appearing. Each defined the same, but the buttons don't seem to roll > over. What else do I have to define to do this. > Well it works for me and many others, so obviously.......... So lets begin: 1. I found out (the hard way), that if you configure button 1 with sip account a, and button 2 with sip account b, then you can't try this (using sip account a) on button 3, it has to be in order (I didn't design it). 2. Make sure call waiting is disabled, although some suggested that it is not required, since you are asking me, and this is how I have it setup, and I never tested it any other way, give it a try. 3. Sometimes if you use the buttons on the phone and not TFTP to configure the phone, you might mistake what parameteres to match to the first button, therefore try making everything the same if possible. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
